- Home
- Equipment
Refine by
Inertia Dynamics Environmental Equipment & Supplies
7 equipment items found
Manufactured by:Warner Electric based inSouth Beloit, ILLINOIS (USA)
SL series power-on clutches are used to couple two parallel shafts. The armature hub assembly is mounted to the same shaft as the rotor assembly. The armature hub accommodates a pulley, gear, sprocket, etc., to transmit torque to the second shaft. The field assembly is mounted on the shaft and retained by a loose-fitting pin or bracket through the anti-rotation ...
Manufactured by:Warner Electric based inSouth Beloit, ILLINOIS (USA)
Inertia Dynamics features four sizes of ball bearing clutches. All sizes have ball bearing armature and field assemblies for heavy duty applications, allowing higher shaft speeds and side loads to be achieved. All BSL clutches are shaft mounted for easy installation and operate in the same manner as our SL series ...
Manufactured by:Warner Electric based inSouth Beloit, ILLINOIS (USA)
Inertia Dynamics' Single C-Face Power-Off Brakes are designed to decelerate or hold inertia loads when the power is turned off. The single C-Face mounts on the fan or non-driven end of a ...
Manufactured by:Warner Electric based inSouth Beloit, ILLINOIS (USA)
Our Single C-Face Power-Off Brake is also available with cast iron housing for applications involving corrosive environments. The heavy-duty housing also includes o-ring seals to create a dust-tight ...
Manufactured by:Warner Electric based inSouth Beloit, ILLINOIS (USA)
Inertia Dynamics offers a wide range of clutch-brake controls, which are used throughout the manufacturing and processing industries. These controls employ modern solid-state technology to provide optimum clutch-brake performance and ease of ...
Manufactured by:Warner Electric based inSouth Beloit, ILLINOIS (USA)
Inertia Dynamics type FSB brakes are designed to decelerate or hold inertial loads when the voltage is turned off. These brakes can be mounted to a bulkhead or ...
Manufactured by:Warner Electric based inSouth Beloit, ILLINOIS (USA)
Inertia Dynamics type FSBR brakes are designed for applications requiring minimum space (short axial length) or for motors with short shaft extensions. When mounted, the hub is installed on the shaft first, then the brake is installed over the hub and attached to the ...